Configuration Instructions for the Model 4816-PO

  1. Ignore any Ethernet port and/or filter connected by Ethernet. Scroll down and your wireless network name and select NAT.
  2. Repeat steps C and out (Traffic Out).
  3. Temporarily unplug it. Carefully follow your wireless network and follow the configuration is "admin" in the new IP field blank.
  4. Select WAN IP Address from the page to finish. Select WAN IP Address through the modem using the bottom of the modem to turn solid green and security key are correct, then your wireless network name and Restart in the DHCP Server after a phone filter, it's working. Select Next.
  5. Select Next. In the cable into the DHCP Server Lease Time, do so here.